Orion DVD 337S
Same as the 2000 model Oritron DVD100
With no cd in, press MENU, 1, 6, 7 and MUTE unlock all regions
Or
With no cd in, menu, 9, open, 5, mute.
Oritron DVD200
Same as above
Oritron DVD600
Same as above
Oritron DVD650
Same as above
Pacific PDVD-1000
Open tray, enter 8421, press enter until you get to no.9, close tray.
Palsonic DVD-3000
Insert any disc, select the PBC button on the remote control, then followed by selecting the play button. The PBC function is for high-level menus and RCE coding.
Panasonic A112, Panasonic A120, Panasonic RP56, Panasonic RV31, Panasonic SC-HT80
Open cd drawer, Press 9, 8, 1, 7 on the remote control, Press ENTER till it shows region 9 and Press RETURN.
Also
There are mod chips available, see the mod chip tutorial.
Philco DV-P2000
Remove the disc and close the disc tray. Press STOP STOP SETUP 3 8 8 8 3 and choose the region.
Philco DV-P2100
Open tray, Press 8926 "*" will be seen on the screen. Then select area 1 to 6 or "0" for all. Press PLAY tray will close.
Philco DV-P2500
Open the player's tray, Press 8 8 8 8 four "*" will be shown on the screen. Select the region 1 to 6 or "0" for region free. Press play to end the operation and the tray will close.
Philco PH-5000, Philco PH-5100
Turn on player, Press Eject on remote control. Press 77 + enter Some Remotes use the "Select" key region code: 13 + enter. Press Play and Put a DVD in the tray then Press play.
Philco PH-7000
Press "set-up", "Pause/Still", Press "Prev", Press "Next". Then Select -- REGION then -- BYPASS.
Philco PH-9000
Same as the 5000 series
Philco 9100 and 7100
Turn on player, Press Eject on remote control. Press 74 + enter then region CODE: 13 + enter. Press Play and Put a DVD in the tray. Press play
Philco PH-9200
Turn on player, Press Eject on remote control then Press 8421 or 1248 with region CODE: 9 for multiregion. Press select and Put a DVD in the tray, Press play.
All Philips DVD Models
See http://home.hccnet.nl/r.de.haas/RC6/index.html
Or
http://www.home.zonnet.nl/jeroenverhaar/en/index.htm
Philips DVD 704
Power on the unit with no disc. Press, "PAUSE" on the remote. Enter "3 1 4 1 5 9" on the remote "CODE 1" will be shown. "1" is the current region code. Press "0"
on the remote 0=AUTO, 1,2,...=set region. Press, "PAUSE" on the remote. Power the player off, and then back on
Philips DVD 707
Power on the unit. Press SETUP on the remote. Open the tray. Press code 8421 the current zone will be displayed on screen. Press SELECT on the remote until zone 9 be displayed on screen. Close the tray.
Philips DVD 710
Try the above
or
http://www.dvd.reviewer.co.uk/info/multiregion/full/philips750.asp
Philips DVD 724
Open the tray using the OPEN/CLOSE button or holding down 1 on the remote, Press 1111 slowly, Press 0.The display should show "region 0" as spelt.
Philips DVD 730
Press PLAY and enter the code 274, 159. Your "player" should display ______ ______. Enter the code 222 222 005 255 and press play. Your screen should go RED. Leave the red screen on for 20 seconds. Turn the player off with the main power switch NOT STANDBY! and turn on after 10 seconds.
Philips DVD 736K
Same as 724 model.
Philips DVD 762
Same as 724 model.
